Cipp Services

Air Invertors Shooters/Gun Units are ideal for continuous air inversion of Cured-In-Place-Pipe (CIPP) liners and calibration hoses, and can be used for ambient cure lining systems.  CIPP Services manufactures a full range of Air Inverters (a.k.a Shooters) for all CIPP liners.  CIPP Services inversion shooter equipment are built for liner installation from sizes 4" diameter shooter gun to glands and mega shooters that accommodate liners up to 144" in diameter.  Please visit CIPP Services' Marketplace for more details on all our inversion unit, packages and attachments needed for a successful liner installation.

3" - 12" Bladder Gun/Lateral Gun - CIPP Bladder Gun/Lateral Gun. Stackable for mainline lining. Can clamp two shooters on top if bladder blows. Fits in tight quarters. Requires 70 cfm air compressor and pressure lube tank. Interchangeable liner adapter. Light weight (30 lbs. approx.). Adjustable legs. Steam caps or water cap fits on top. Compact design that disassembles easily, it is great for installing CIPP liners from basements, small excavated pits and other confined spaces of 4" to 6".

3-12 Stackable Bladder Gun - Shooter 1

4"-6" CIPP Aluminum Lateral Drum/Tank Shooter - Quality aluminum and guarantee high service life. Air pressure inversion tank. 4" liner capacity up to 99 feet, or 5" liner capacity up to 76 feet, and 6" liner capacity up to 53 feet.

Drum Shooter

4" - 8" Adjustable Compact Air Inverter/Shooter - Great for mainline 6"-8" lining. Shoots up to 8" CIPP liners. Will shoot 4" liner with additional fittings (see opts below). Unit will air invert liner then steam cure without dropping air pressure within liner. 600 CFM PREFERRED (375 CFM min). Adjustable tongue & includes adjustable leg set. 2" NPT main inlet, 2" inlet with valve. Internal pressurized oil gasket lubrication.
* Inversion gaskets and pressure lube tank required.

Shooter 4-8 Brochure - website 1

6" - 12" Air Inverter/Shooter - Shoots up to 18" CIPP liner. Unit will air invert liner then steam cure without dropping air pressure within liner. 600 CFM PREFERRED (375CFM min). Adjustable tongue and includes adjustable leg set. 3" NPT main inlet, 2" inlet with valve. Internal pressurized oil gasket lubrication.
* Inversion gaskets and pressure lube tank required.

Shooter 4-18 - website 1

6" - 18" Air Inverter/Shooter - Shoots up to 18" CIPP liner. Unit will air invert liner then steam cure without dropping air pressure within liner. 600 CFM PREFERRED (375CFM min). Adjustable tongue and includes adjustable leg set. 3" NPT main inlet, 2" inlet with valve. Internal pressurized oil gasket lubrication.
* Inversion gaskets and pressure lube tank required.

6-18 Shooter (2)

18"-30" Air/Water Inverter - Pinch Shooter (Light Weight) - ALUMINUM - Note: picture shown is without paint coating. Easily adaptable in the field for use with different liner sizes ranging from 18" to 30" diameters, using the appropriate adapters. These shooters are hydraulic powered and manual rollers. 18"-30" Shooter will require manual operation. Heavy duty-durable wheels for easy mobility. Additional cost for paint color of your choice. (Contact us for more information as there are many options for add-ons including wet-out table at an additional cost).

18-30 Shooter - Website

18" - 36" and 18" - 48" Air/Water Inverter - Pinch Shooter - (STEEL) Note: picture shown is with the standard paint coating. Easily adaptable in the field for use with different liner sizes ranging from 18" to 48" diameters (range depending between the two shooter equipment size available), and using the appropriate adapters. CIPP Services 18"-36" and 18"-48" Air Inverter Base Model's come with a single gland. Non- powered roller. (2) Manual Hydraulic rams on sliding linear bearing tray, liner hold down bars, (4) 12" swivel tires designed for easy handling, Drive option, and other add-ons such as Power feed conveyor with forward/reverse and speed control, wrapped with belting w/ 2 lifting cylinders on the rear of the conveyor to tilt the conveyor up & down, are also available options. Additional cost for paint color of your choice. (Contact us for more information as there are many options for add-ons including wet-out table at an additional cost).

36 inch Shooter - 2019

18" - 60" Air Inverter - Air or Water Inverter (without wet-out table) - Easily adaptable in the field for use with different liner sizes ranging from 18" to 60" diameters. These shooters are available with add-on: Hydraulic powered or manual (portable) power rollers and/or hydraulic driven conveyor belts to assist wet line during liner installation, built-in A-steam station, pressure sensor reader. Additional cost for paint color of your choice. (Contact us for more information as there are many options for add-ons including wet-out table at an additional cost).

 

60 inch Shooter - 2
60 inch Shooter - 2

18" - 90" Air Inverter - Air or Water Inverter (without wet-out table) - Easily adaptable in the field for use with different liner sizes ranging from 18" to 90" diameters, using the appropriate adapters. These shooters are available with add-on: Hydraulic powered or manual (portable) power rollers and/or hydraulic driven conveyor belts to assist wet line during liner installation. Additional cost for paint color of your choice. (Contact us for more information as there are many options for add-ons including wet-out table at an additional cost).

 

Shooter 18-60 - website 1

Air Compressors are ideal for continuous air inversion of Cured-In-Place-Pipe (CIPP) liners and calibration hoses, and can be used for ambient cure lining systems.

Air Compressor with After Cooler - Website

NOTE: All pictures, videos, designs and specifications are subject to change without notice.

Translate »